Absolute Aquatics 1-888-776-3159

The 8400VFX (Single Phase) & 2.3VFX ( 3 Phase), 2 hp floating aerating fountain is great for larger ponds.

The classic Kasco "V" fountain pattern, 8' tall x 32' wide gives this model a beautiful eye-catching display. The larger motor and enhanced propeller design gives the 8400VFX & 2.3VFX 2.5 times the water flow as the 4400VFX. It is precision engineered to add maximum oxygen to improve your pond or lake aeration. It will assist in improving your water quality as well as adding to the aesthetic appeal of your pond.

It is available in a 240V, Single Phase and 208/240V, 3 Phase, 60Hz models.

Contact us for 3 Phase Units power cord lengths above 300ft.

Examples of THE 8400VFX in use:Click on the photos for closer up image.

Features and Benefits of the 8400VFX & 2.3VFX

• Dramatic “V” Pattern: 8' tall x 32' wide
• Efficient / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit. 10 running amps on a 240V, single phase circuit and 7.5 amps on 208/240V, 3 phase circuit for low operating costs.
• Clog Resistant: Unique water-deflecting nozzle design gives you the most clog-resistant model on the market. Successful shallow water operation in as little as 20"
• Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Seals are silicone carbide for long life. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation.
• Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode.
• Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded.
• Fully Tested: ETL listed to stringent UL and CSA Safety Standards.
• Ships Easily: Via UPS in 3 or 4 boxes (add 1 box for lights)
• Dependable: Backed by a three-year warranty
• Choice of Cord Lengths: SJTOW or SOOW underwater rated power cord length options of 50', 100', 150', 200', 250', (300', or 400' 500' special order) Includes three 50' braided nylon mooring ropes.
  
• Made in the U.S.A.
•  
• The 8400VFX is supplied with a state-of-the-art GFCB protected control panel, model C-85. The panel includes a 240 volt control panel with timer, GFCB protection, 120V GFI protected outlet for lights, and photocell for light operation. Kasco recommends a licensed electrician to install the C-85 control panel and the 8400VFX if you plan to hard-wire the unit into the C-85 control panel.

  The 2.3VFX, 3 phase unit is supplied with a simple to use, all inclusive GFI protected 3 phase control panel, model CF-3235. Without the confusing options, these panels include all the best features. Included in this UL-508A, non-metallic 4x/3r panel is a true, 3 phase rated personnel protection GFI with a 5ma trip level. Also included is a motor starter with adjustable overload, lightning/surge protection, two 24 Hour time clocks (one for the unit and one for lights), and a Hand-Off-Auto switch. Other features are an angled field wiring terminal block for easy installation, input terminals for field installed interlock, and startup instructions with wiring diagram in the door. A licensed electrician should install this panel.
  

  The 8400VFX & 2.3VFX boast an innovative float design with a low profile in the water for enhanced appearance, plus an attractive decorative shape.
  

  

  Low Voltage Light kits are available in Red, Green, Blue and Yellow

  Add an optional LR-375 Low Voltage Light Kit to the 8400VFX & 2.3VFX to extend its beauty into the nighttime hours. Lighting enlivens the water display, turning water drops into glimmering jewels of light while creating a resort-like appearance with the overall water feature.

   

  The LR-375 Low Voltage Light Kit includes three machined-bronze light fixtures each with 75 watt MR-16 Halogen lamps. The lighting kit’s transformer is integrated into the system, so there’s no extra wiring required. Simply plug it into the C-85 Control Panel and the lights will operate whenever the unit operates during darkness. Three clear MR-16 lamps are included with each kit. As an option, you can choose any or all of the optional colors of Red, Green, Blue & Yellow. Two sets of LR375 lights can be added for more dramatic displays.