C-10 controller

Kasco Marine Control Panels

(No reviews yet) Write a Review
$118.00 - $2,053.50
SKU:
KASCONTROL
Weight:
10.00 LBS
Shipping:
Free Shipping

Kasco Fountain Control Panels will deliver the performance and safety you need to get the most from your Kasco Fountain, Aerator or Circulator. Whether you’re looking for a replacement or an upgrade, we have the right control panel for you. Each controller is designed to control ONE unit. All controllers are UL listed. If you have any questions about what control panel is right for your situation call us at 803-808-7700 or Toll Free at 888-776-3159.

C-10
The C-10 thermostat controller is an inexpensive way to control the operation of your de-icer. The C-10 uses an air temperature thermostat to turn the de-icer on when the temperature drops below a set point that you decide. One C-10 controls one 120V de-icer.

C-20
The C-20 time and temperature controller allows you to determine at what air temperature AND time of day the de-icer turns on by using both an air temperature controller and timer clock. One C-20 will control one 120V de-icer.

C-25
A plug-and-go GFCI protected control panel with 24-hour timer and a photocell controlled outlet for optional lighting.

  • 120V
  • Single Phase
  • 15 amp

C-85
A 20 amp control panel featuring GFCI protection, a 24-hour timer for the unit being controlled and a second 24-hour timer for optional lighting. Surge protection, and a terminal block for hardwiring the equipment are included, all in a thermoplastic NEMA 3r/4x enclosure. The C-85 Control Panel requires a hard-wire connection to four leads (L1, L2, a neutral, and a ground) and must be installed by a qualified electrician.

  • 240V
  • Single Phase
  • 20 amp

C-95
A 30 amp control panel featuring GFCI protection, a 24-hour timer for the unit being controlled and a second 24-hour timer for optional lighting. Surge protection, and a terminal block for hardwiring the equipment are included, all in a thermoplastic NEMA 3r/4x enclosure. The C-95 Control Panel requires a hard-wire connection to four leads (L1, L2, a neutral, and a ground) and must be installed by a qualified electrician.

  • 240V
  • Single Phase
  • 30 amp

CA-220 (Call or email us to order)
The new CA-220 control panel works exclusively with our 3/4, 1 and 2HP, 240V surface aerators and allows you to easily control when your unit turns on and off. This control panel is a less expensive option as it does not control unit lighting. This UL listed, 20amp control panel features GFCI protection, 24-hour timer and field terminal connections for incoming power and aerator wiring, all inside a durable thermoplastic enclosure. If you wish to control unit lighting, see our C-85 control panels.

  • 240V
  • 20 amp
  • For use with 3/4, 1 and 2HP, 240V surface aerators

CA-230 (Call or email us to order)
The new CA-230 control panel works exclusively with our 3 and 5HP, 240V surface aerators and allows you to easily control when your unit turns on and off. This control panel is a less expensive option as it does not control unit lighting. This UL listed, 30amp control panel features GFCI protection, 24-hour timer and field terminal connections for incoming power and aerator wiring, all inside a durable thermoplastic enclosure. If you wish to control unit lighting, see our C-95 control panels.

  • 240V
  • 30 amp
  • For use with 3 and 5HP, 240V surface aerators

CA-3235
The CA-3235 offers a single 24-hour timer in a GFCI protected 3 phase control panel. This UL-508A listed non-metallic 4x/3r panel has a 30ma trip level GFCl, a motor starter with adjustable overload, lightning/surge protection, and a Hand-Off-Auto switch.

  • 208/240V
  • Three Phase
  • For use with 2, 3, and 5 HP units

CF-3235 (Call or email us to order)
The CF-3235 offers dual 24-hour timers (one for unit, one for lights) in a GFCI protected 3 phase control panel. This UL-508A listed non-metallic 4x/3r panel has a 5ma trip level GFCl, a motor starter with adjustable overload, lightning/surge protection, and a Hand-Off-Auto switch.

  • 208/240V
  • Three Phase
  • For use with 2, 3, and 5 HP units

CF-3075 (Call or email us to order)
The CF-3075 offers dual 24-hour timers (one for unit, one for lights) in a GFCI protected 3 phase control panel. This UL-508A listed non-metallic 4x/3r panel has a 5ma trip level GFCl, a motor starter with adjustable overload, lightning/surge protection, and a Hand-Off-Auto switch

  • 208/240V
  • Three Phase
  • For use with 7.5 HP units

No one should be in the water while equipment is operating or plugged in. The GFCI protected circuit should always be used.

It is essential to test any GFCI monthly to ensure proper operation. Check instructions for procedure.

Kasco equipment can come with up to 500′ of power cord. It is important to not add any additional cord; adding additional cord will void warranty, void ETL approval, and could cause nuisance tripping of the GFCI.

Single Phase Controller Specs

Customers Also Viewed