P1000 Ice Eater Large Boats and Marinas
120 Volt cord length max is 150 Feet
The Ice Eater is designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water.
Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation.
Ice Eater will melt existing ice. Unlike other de-icing units, Ice Eater requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in.
For all duck hunting specifications, generators, stands
and technical expertise, please contact:
The Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.
The design of the Ice Eater's venturi shroud (housing) with outwardly flared ends, provides more upward thrust & draws warmer water from greater depths than other conventional de-icers.
The shroud is submersible below the surface either vertically or angled from vertical. A set of mounting holes at opposed positions on the flange allows the lines to be attached.
The Power House is committed to providing the finest de-icers available in the marketplace. As a result, specifications are subject to change without notice.
- Ice Eater de-icers are custom designed and engineered for maximum performance.
- Our units are designed to agitate fresh or salt water at maximum efficiency in all climatic conditions.
- Our energy efficient Ice Eater's will agitate more water than any de-icer on the market today.
- We ship by U.P.S. or motor freight.
US Patent # 4,247,261
- 120V 7.0 Amps (240V 3.5 amps)
- Open Diameter: 80 ft.*
- Lbs of Thrust: 36
*Based on an average winter, extreme conditions will cause open diameter to become smaller.